M30
(Not lithium coin type as stated in the owners manual)
A new remote has to be memorised into your security system for it to operate - this is called 'code learning'. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below.
TO MEMORISE A NEW REMOTE:
a) Disarm the system by remote or the override method.
b) Open the door and press and hold the override switch.
c) Turn the ignition off/on three times (leave ON 3rd time). Dash LED lights constantly to indicate learning mode.
d) Press any button on the 1st remote. Dash LED will flash 3 times to confirm learning
e) Press any button on the 2nd remote. Dash LED will flash 3 times to confirm learning.
f) Turn the ignition OFF and release the override switch to complete the learning.
If no remote button is pressed within 10 sec’s of entering learning mode, the system will exit.This procedure can be repeated for up to 4 remotes. Learning just one remote erases all previous. All existing remotes must be learnt at the same time.
