M40
M20 and/or MRC200W remote may also be used with the MX40
A new remote has to be memorised into your security system for it to operate - this is called 'code learning'. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below.
Code learning;
MX40 - early models without PIN coded override
- Disarm by existing remote, or use the override
- With door closed, turn the ignition ON – open and close the drivers door 5 times – siren chirps
- Press arm button on first remote (siren chirps)
- Press arm button on second remote (siren chirps)
- Repeat for any other remotes
- Turn ignition OFF
MX40 - with 4 Digit PIN override
- Disarm by existing remote, or use the PIN override
- Open the drivers door and leave open
- Turn the ignition ON/OFF 3 times – siren chirps
- Press arm button on first remote (siren chirps)
- Press arm button on second remote (siren chirps)
- Repeat for any other remotes
- Wait 10 seconds for learning process to complete
